The most versatile Aliphatic Resin within the WOODLOK range. WOODLOK 2300 cures to give high strength bonds on softwoods, most hardwoods, particleboard and MDF. Moderate open time and is fast setting due to the high solids content.
COMMON USES
Suitable for edge and face gluing, dowelling, joinery, laminating, mitres and general assembly work.
BONDS
For bonding most hardwoods, softwoods, particleboard and MDF.
ADVANTAGES
Fast cure.
Excellent sandability.
Cured bonds will withstand a wide range of temperature and humidity conditions.
PROPERTIES
Chemical Description : Aliphatic Resin Emulsion.
PREPARATION
All surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing. Generally, wood requires no special preliminary treatment, however, the most efficient bonds develop when the wood has been resurfaced just prior to applying glue with sharp blades.
TECHNICAL DETAILS
Viscosity : 7,000cps
Solids : 47%
Open Time @ 20°C : 7min
Base : PVA
APPLICATION METHOD
For best results, temperatures should be above 15°C for both the work area and the stock being used.
APPEARANCE
Yellow fluid.
ODOUR
Charateristic PVA odour when wet. None when dry.
CLEAN UP
Water while wet. Cured glue must be cut, scraped or sanded away.
COVERAGE
120gm—240gm m² of glue line is recommended depending on substrate.
Login
COMMON USES
- Suitable for edge and face gluing, dowelling, joinery, laminating, mitres and general assembly work.
BONDSFor bonding most hardwoods, softwoods, particleboard and MDF.
ADVANTAGES
- Fast cure.
- Excellent sandability.
- Cured bonds will withstand a wide range of temperature and humidity conditions.
PROPERTIES- Chemical Description : Aliphatic Resin Emulsion.
PREPARATIONAll surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing. Generally, wood requires no special preliminary treatment, however, the most efficient bonds develop when the wood has been resurfaced just prior to applying glue with sharp blades.
TECHNICAL DETAILS
- Viscosity : 7,000cps
- Solids : 47%
- Open Time @ 20°C : 7min
- Base : PVA
APPLICATION METHODFor best results, temperatures should be above 15°C for both the work area and the stock being used.
APPEARANCE
- Yellow fluid.
ODOURCharateristic PVA odour when wet. None when dry.
CLEAN UP
Water while wet. Cured glue must be cut, scraped or sanded away.
COVERAGE
- 120gm—240gm m² of glue line is recommended depending on substrate.
- 1 litre will cover approximately 10m2.
SIZES