JB Weld Plastic-Bonder Syringe 25ml

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset plastics, carbon fibre composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

GREAT FOR

• Filling Dents
• Bumpers
• Automotive Trim
• Composite Panels
• Interior & Exterior Plastic Parts
• Fibreglass
• Automotive

BONDS

• Plastic/Composite/PVC
• Brick
• Ceramic
• Concrete
• Epoxy & Adhesives
• Fibreglass
• Wood
• Carbon Fibre

PROPERTIES

• Strength: 3770 PSI
• Set Time: 15 Minutes
• Cure Time: 30 Minutes
• Cure Colour: Tan
• Sandable

INSTRUCTIONS

• Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
• After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
• Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
• Sets in 15 minutes. Cures in 30 minutes. If temperature is below 5ºC, then set time is longer.