TECBOND 267 43mm Assembly Hot Melt Slugs 10kg

TECBOND 267 is a high performance adhesive formulated for Polyofin plastics such as polypropylene and polyethylene. This adhesive has a high heat resistance of 110ºC and good low temperature resistance of -30ºC.

To achieve a good bond on polypropylene it is important that the bond is made at the highest temperature possible i.e. > 200˚C. Good bonds can be achieved on polyethylene, polypropylene, polycarbonate, nylon, rigid PVC, light gauge metals and polystyrene and many other substrates. All bonds should be tested at least 24 hours after assembly at both the high and low temperatures they will be expected to withstand in service.

Due to the unique flexible nature of TECBOND 267 it is only available in 43mm cartridges.

COMMON USES

• Formulated to bond polypropylene and polyethylene.

PROPERTIES

• Long open time.
• Service temperature -30°C to 100°C
• Application Temperature : 180 - 215°C
• 3,000 cps

APPEARANCE

• Light Brown

SIZES

• 10kg carton (180 x 43mm x 43mm sticks)

MATERIAL SAFETY DATA SHEET