JB Weld Cold-Weld Epoxy

JB Weld is the original cold weld, steel reinforced, two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces with extremely high heat resistance.

Forms a permanent bond which can be shaped, tapped, filed, sanded and drilled after curing.

J-B Weld has a tensile strength of 3960 PSI and sets to a dark grey colour in 4-6 hours, before curing to a hard bond overnight. It can withstand temperatures up to 290ºC when fully cured.

BONDS

• Most metals
• Fibreglass
• Many plastics, including PVC
• Wood
• Concrete
• Ceramic & tile
• Brick
• Epoxy and adhesives, including itself

APPLICATIONS

• Automotive industry
• Home repairs
• Industrial
• Outdoor equipment
• Arts & craft
• Marine
• Agricultural equipment
• Toys
• Plumbing

PROPERTIES

Tensile Strength: 3960 PSI
Set Time: 4-6 Hours
Cure Time: 15-24 Hours
Cure Colour: Dark Grey
Temperature Resistance: 290ºC

PREPARATION

Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

INSTRUCTIONS

• Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
• Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
• Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.