ULTRA-TAC is a premium quality pressure sensitive spray adhesive formulated for bonding a wide variety of insulation materials and building wraps to steel, aluminium, wood and concrete. ULTRA-TAC can be used single-sided due to its ultra tacky consistency, or double-sided as a contact adhesive for more aggressive bonds. ULTRA-TAC is an excellent choice for bonding fibre glass, polyester and polystyrene insulation to steel and other porous and non-porous substrates. ULTRA-TAC is commonly used for attaching building wraps and polystyrene directly onto steel framing prior to cladding due to its high speed application and ease of use.
ULTRA-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Clickhereto view.
COMMON USES
Bonds Insulation Material to Ducting, Bonds Building Wrap & Polystyrene to Steel Framing, Bonds Polystyrene to a Variety of Substrates, Bonds Carpet & Underlay, Tape Primer on Porous Surfaces, Formwork Construction
BONDS ULTRA-TAC will bond almost any substrate and remain permanently tacky, substrates include: duct insulation, steel, aluminium, fiberglass, Expanded Polystyrene Foam (EPS), polyester, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, corflute and most plastics.
ADVANTAGES
Pressure Sensitive
Single or Double
Sided Application
Polystyrene Safe
Waterproof
Long Open Time
No Ozone Depleting Substances
Low Odour
High Coverage
High Solids
PREPARATION For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
TECHNICAL DETAILS
Chemical Description: Solvent Based Contact Adhesive
Solids Content: 40 - 46%
Viscosity: Sprayable Grade
Minimum Open Time: 1 - 5 minutes
Maximum Open Time: 5 hours (best results within 1hr)
CLEAN UP Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
LIMITATIONS ULTRA-TAC is not suitable for High Pressure Laminates (HPL) or applications requiring high strength due to its tacky & flexible glue line. For high strength bonds on polystyrene we recommend POLY-TAC. ULTRA-TAC is not suitable for vinyl flooring.
TESTING Always test the suitability of the product for your application before use.
COVERAGE 15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
Login
ULTRA-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Click here to view.
COMMON USES
- Bonds Insulation Material to Ducting, Bonds Building Wrap & Polystyrene to Steel Framing, Bonds Polystyrene to a Variety of Substrates, Bonds Carpet & Underlay, Tape Primer on Porous Surfaces, Formwork Construction
BONDSULTRA-TAC will bond almost any substrate and remain permanently tacky, substrates include: duct insulation, steel, aluminium, fiberglass, Expanded Polystyrene Foam (EPS), polyester, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, corflute and most plastics.
ADVANTAGES
- Pressure Sensitive
- Single or Double
- Sided Application
- Polystyrene Safe
- Waterproof
- Long Open Time
- No Ozone Depleting Substances
- Low Odour
- High Coverage
- High Solids
PREPARATIONFor best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
TECHNICAL DETAILS
- Chemical Description: Solvent Based Contact Adhesive
- Solids Content: 40 - 46%
- Viscosity: Sprayable Grade
- Minimum Open Time: 1 - 5 minutes
- Maximum Open Time: 5 hours (best results within 1hr)
- Heat Resistance: -40 – +85ºC
- Cleaner: Citrus Cleaner or Acetone
- Flash Point: -41ºC
- Specific Density: 0.70kg per ltr +/- 5%
APPLICATION METHODSprayed through CANTAC brand Guns & Hoses (Sold separately) - Click here to view
APPEARANCE
- Clear Sprayable Liquid
ODOURMinimal Solvent Odour
CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
LIMITATIONS
ULTRA-TAC is not suitable for High Pressure Laminates (HPL) or applications requiring high strength due to its tacky & flexible glue line. For high strength bonds on polystyrene we recommend POLY-TAC. ULTRA-TAC is not suitable for vinyl flooring.
TESTING
Always test the suitability of the product for your application before use.
COVERAGE
15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
SIZES
TECHNICAL DATA SHEET