TECHNOMELT Q3635 Hot Melt 15kg

White, hot melt adhesive for high strength bookbinding, designed to run in modern fully automatic machines.



COMMON USES

• A good general purpose spine hot melt covers many machine types and a range of machine speeds.

BONDS
Technomelt Q 3635 is suitable for perfect binding of most of the common papers and provides an excellent bonding strength. We recommend to test coated papers before starting production.

ADVANTAGES

• Very good specific adhesion to many paper types
• Gives excellent strength with permanent flexibility and toughness.
• Good bond strength is retained at high temperatures and the cold crack point is low.

PROPERTIES

• Open Time: medium
• Setting Time:    medium

TECHNICAL DETAILS

• Viscosity 4,400 - 6,000 cps at 160degC
• Softening Point    77 - 87degC (R&B)

APPLICATION METHOD
Working Temperature 160 - 180 degC, measured on roller. Technomelt Q 3635 usually is applied without primer with an application thickness of 0.5 - 1 mm on a dust free paper surface. The ideal coating and spine preparation depend to a great extent on the paper quality, fibre direction and cover weight respectively.

APPEARANCE

• White granules.

ODOUR
Little odour hot. No odour cold.

CLEAN UP
For the cold cleaning of surfaces on application equipment, conveyor belts or other machine parts, Melt-O-Clean can be applied. Melt-O-Clean is based on natural resources and facilitates manual cleaning even in case of pronounced charring. Before using Melt-O-Clean, its suitability for lacquered and synthetic coated surfaces should be tested.

SIZES

• Granules, packed in 25kg multiwall bag.