WOODLOK 2200 is a cost effective Aliphatic PVA Wood Glue suitable for general purpose wood to wood applications. Long open time in comparison to other formulations making it ideal for lamination full sheets of MDF to MDF or Particleboard. Easy to apply and works well with most machinery.
COMMON USES
Ideal for lamination full sheets of MDF to MDF or Particleboard.
BONDS Very effective on large areas of MDF to MDF.
ADVANTAGES
Long open time.
Excellent penetration to timber surfaces.
PROPERTIES
Long open time, deeply penetrating while wet.
PREPARATION All surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing.
TECHNICAL DETAILS
Viscosity : 3,500 - 4000cps
Solids : 36%
Base : PVA
APPEARANCE
Yellow Liquid.
ODOUR Slight typical PVA odour when wet, none when dry.
CLEAN UP Water whilst wet. When dry machine or sand the hardened adhesive away.
LIMITATIONS Minimum application temp 10 deg C. Best application temp over 15 deg C.
COVERAGE
120gm—240gm m² of glue line is recommended depending on substrate.
Login
COMMON USES
- Ideal for lamination full sheets of MDF to MDF or Particleboard.
BONDSVery effective on large areas of MDF to MDF.
ADVANTAGES
- Long open time.
- Excellent penetration to timber surfaces.
PROPERTIES- Long open time, deeply penetrating while wet.
PREPARATIONAll surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing.
TECHNICAL DETAILS
- Viscosity : 3,500 - 4000cps
- Solids : 36%
- Base : PVA
APPEARANCE- Yellow Liquid.
ODOURSlight typical PVA odour when wet, none when dry.
CLEAN UP
Water whilst wet. When dry machine or sand the hardened adhesive away.
LIMITATIONS
Minimum application temp 10 deg C. Best application temp over 15 deg C.
COVERAGE
- 120gm—240gm m² of glue line is recommended depending on substrate.
- 1 litre will cover approximately 10m2.
SIZES