WOODLOK Bondall Polyurethane is a moisture cure polyurethane glue suitable for adhering a wide variety of substrates. The adhesive foams when curing and drives into the wood fibres when used on timber and porous substrates. Cured adhesive is waterproof and resists heat and chemicals. Easy to sand and accepts stains and lacquers. Excellent adhesive for the manufacture of stainless steel bench tops and industrial laminating of sheet materials.
COMMON USES
WOODLOK 3500 is a moisture curing polyurethane adhesive formulated for interior and exterior applications.
BONDS Used primarily as a wood glue, but can also be used to bond almost any other substrate provided one of them is porous. Can also be used for manufacture stainless steel bench tops, sandwich panels, plywood panels etc.
PROPERTIES
Typical Viscosity: 2,500cps @ 25°C
Solids Content 100% (Solvent Free)
PREPARATION All surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing.
TECHNICAL DETAILS
Chemical Description : Polyurethane
Open Time @ 20°C 15 minutes
Cure Time @ 20°C 4 hours
APPLICATION METHOD Coverage of 6m² per litre when laminating. 120gm—240gm m² of glue line is recommended depending on substrate. Wood surfaces should be smooth and snug fitting. Avoid excessive sanding or handling of the joint surface. Wipe one side with a damp cloth and apply adhesive to the opposite side.
APPEARANCE
Honey coloured fluid.
CLEAN UP Use Acetone for cleaning tools and spills. Always wear gloves when using this product. Cured glue can be cut, scraped or sanded away.
Login
COMMON USES
- WOODLOK 3500 is a moisture curing polyurethane adhesive formulated for interior and exterior applications.
BONDSUsed primarily as a wood glue, but can also be used to bond almost any other substrate provided one of them is porous. Can also be used for manufacture stainless steel bench tops, sandwich panels, plywood panels etc.
PROPERTIES
- Typical Viscosity: 2,500cps @ 25°C
- Solids Content 100% (Solvent Free)
PREPARATIONAll surfaces to be glued must be clean and dry. Remove all oil, grease, wax, old glue, finish or other foreign material before gluing.
TECHNICAL DETAILS
- Chemical Description : Polyurethane
- Open Time @ 20°C 15 minutes
- Cure Time @ 20°C 4 hours
APPLICATION METHODCoverage of 6m² per litre when laminating. 120gm—240gm m² of glue line is recommended depending on substrate. Wood surfaces should be smooth and snug fitting. Avoid excessive sanding or handling of the joint surface. Wipe one side with a damp cloth and apply adhesive to the opposite side.
APPEARANCE
- Honey coloured fluid.
CLEAN UPUse Acetone for cleaning tools and spills. Always wear gloves when using this product. Cured glue can be cut, scraped or sanded away.
SIZES