DAP Quick Plug Anchoring Cement 10lb

For plugging and sealing holes in concrete & masonry - creates a watertight seal even while water is flowing.

Can also be used as an anchoring cement.

COMMON USES

• For stopping water flow and permanently sealing deep cracks and holes in all grades of concrete.

ADVANTAGES

• Creates a watertight seal in masonry/concrete cracks even while water is flowing
• Seals in just 3 to 5 minutes
• Can be used as an anchoring cement
• Interior and exterior

PROPERTIES

• Working Time: 3 to 5 Minutes
• Setting Time: 5 Minutes
• Final Cure: 28 Days

PREPARATION
Chisel holes to enlarge them by at least 1/4” and scrape clean. Remove any loose or chipped concrete. Make sure that the surface to be patched is damp.

APPLICATION METHOD

• Always apply to a damp surface.
• Apply from the top of the opening down.
• Keep the patched area damp for several hours after the application.
• If painting is desired, always use a good quality latex-based or masonry paint for a professional finish.

CLEAN UP
Wash skin and hands with soap and water. Cured material must be scraped away.