WOODLOK 2500 is a pre-catalysed, single pack crosslinking PVA that provides superior heat and moisture resistance over standard Aliphatic and PVA formulations. Meets International Standard EN-204 D3 for water resistance.
COMMON USES
Laminating High Pressure Laminates (HPL) to MDF and particleboard.
Kitchen and Bathroom cabinetry that requires heat and moisture resistant bonds.
Water based alternative to solvent based contacts.
BONDS Timber and panelboards. HPL Laminates. Most common building materials.
ADVANTAGES
Meets International Standard EN-204 D3 for water resistance.
Can be used in traditional cold presses as well as hot press and radio frequency (RF) equipment.
PROPERTIES
Viscosity : 4,500cps
Solids : 48%
Open Time @ 20°C : 5min
APPEARANCE
White when wet / Clear when dry
ODOUR Slight PVA
CLEAN UP Water whilst wet
COVERAGE
120gm—240gm m² of glue line is recommended depending on substrate.
Login
COMMON USES
- Laminating High Pressure Laminates (HPL) to MDF and particleboard.
- Kitchen and Bathroom cabinetry that requires heat and moisture resistant bonds.
- Water based alternative to solvent based contacts.
BONDSTimber and panelboards. HPL Laminates. Most common building materials.
ADVANTAGES
- Meets International Standard EN-204 D3 for water resistance.
- Can be used in traditional cold presses as well as hot press and radio frequency (RF) equipment.
PROPERTIES- Viscosity : 4,500cps
- Solids : 48%
- Open Time @ 20°C : 5min
APPEARANCE- White when wet / Clear when dry
ODOURSlight PVA
CLEAN UP
Water whilst wet
COVERAGE
- 120gm—240gm m² of glue line is recommended depending on substrate.
- 1 litre will cover approximately 10m2.
SIZES