HSE-TAC is a premium low odour, high strength, high heat resistant contact spray adhesive with an extra-long working time formulated specifically for bonding Polyester wall coverings, acoustic and thermal insulation of all types, office partitions, High Pressure Laminates (HPL) to MDF, particleboard and plywood.
HSE-TAC contains no toxic methylene chloride commonly present in competing product so it is much safer to use.
HSE-TAC is an excellent choice for applications requiring extended working times, high strength bonds, and a minimal odour.HSE-TAC is very versatile and is considered one of the flagship products within the CANTAC family of products.HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.
COMMON USES
Bonds Polyester Wall & Floor Coverings
Bonds High Pressure Laminates (HPL)
Radius Edge Banding
Furniture & Upholstery
Automotive & Marine Headliners
Bonds a Variety of Carpets
Bonds Acoustic & Sound Deadening Materials
BONDS HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.
ADVANTAGES
Extra Long Open Time
Very Low Odour
High Heat Resistant
High Strength
Waterproof
No Ozone Depleting Substances
High Coverage
High Solids
Two Way Adjustable Nozzle
PREPARATION For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
TECHNICAL DETAILS
Chemical Description: Solvent Based Contact Adhesive
Solids Content: 27 - 31%
Viscosity: Sprayable Grade
Minimum Open Time: 2 - 5 minutes
Maximum Open Time: 24 hours (best results within 1hr)
Heat Resistance: -40 – +120ºC
Cleaner: Citrus Cleaner or Acetone
Flash Point: Extremely Flammable
Specific Density: 0.70kg per ltr +/- 5%
APPEARANCE
Clear Sprayable Liquid
ODOUR Minimal Solvent Odour
CLEAN UP Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
LIMITATIONS HSE-TAC is not recommended for use on Polystyrene. HSE-TAC is not recommended for Vinyl Flooring.
TESTING Always test the suitability of the product for your application before use.
COVERAGE 5m2 per Aerosol Can Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
Login
HSE-TAC contains no toxic methylene chloride commonly present in competing product so it is much safer to use.
HSE-TAC is an excellent choice for applications requiring extended working times, high strength bonds, and a minimal odour.HSE-TAC is very versatile and is considered one of the flagship products within the CANTAC family of products.HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.
COMMON USES
- Bonds Polyester Wall & Floor Coverings
- Bonds High Pressure Laminates (HPL)
- Radius Edge Banding
- Furniture & Upholstery
- Automotive & Marine Headliners
- Bonds a Variety of Carpets
- Bonds Acoustic & Sound Deadening Materials
BONDSHSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.
ADVANTAGES
- Extra Long Open Time
- Very Low Odour
- High Heat Resistant
- High Strength
- Waterproof
- No Ozone Depleting Substances
- High Coverage
- High Solids
- Two Way Adjustable Nozzle
PREPARATIONFor best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
TECHNICAL DETAILS
APPEARANCE
- Clear Sprayable Liquid
ODOURMinimal Solvent Odour
CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
LIMITATIONS
HSE-TAC is not recommended for use on Polystyrene. HSE-TAC is not recommended for Vinyl Flooring.
TESTING
Always test the suitability of the product for your application before use.
COVERAGE
5m2 per Aerosol Can Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
SIZES
A Material Safety Data Sheet will be supplied upon request, please click here ...