FLOOR-TAC is a natural rubber based, plasticiser resistant contact adhesive formulated for bonding flooring vinyl and rubbers to concrete, plywood, particleboard and most common building substrates.
FLOOR-TAC features very high heat stability (130°C) and superior long term bond strength. FLOOR-TAC is an excellent choice for permanent bonding of HPL to a variety of substrates and is also suitable for a wide variety of applications including furniture and joinery, upholstery work and marine applications.
FLOOR-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Clickhereto view.
COMMON USES
Bonds most Vinyls & Rubbers
Wall & Floor Coverings
Bonds High Pressure Laminates (HPL)
Furniture & Upholstery
Fabric & Textiles
FLOOR-TAC will effectively bond vinyl flooring, high-pressure laminates, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, steel, aluminium, moulded fibreglass and many other materials.
ADVANTAGES
Plasticiser Resistant
High Strength
Fast Tacking
High Heat Resistant
Low Odour
High Coverage
Waterproof
No Ozone Depleting Substances
PREPARATION For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
TECHNICAL DETAILS
Chemical Description: Natural Rubber Contact Adhesive
CLEAN UP Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
LIMITATIONS FLOOR-TAC is not recommended for use on Polystyrene.
TESTING Always test the suitability of the product for your application before use.
COVERAGE 15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
Login
FLOOR-TAC features very high heat stability (130°C) and superior long term bond strength. FLOOR-TAC is an excellent choice for permanent bonding of HPL to a variety of substrates and is also suitable for a wide variety of applications including furniture and joinery, upholstery work and marine applications.
FLOOR-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Click here to view.
COMMON USES
- Bonds most Vinyls & Rubbers
- Wall & Floor Coverings
- Bonds High Pressure Laminates (HPL)
- Furniture & Upholstery
- Fabric & Textiles
FLOOR-TAC will effectively bond vinyl flooring, high-pressure laminates, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, steel, aluminium, moulded fibreglass and many other materials.ADVANTAGES
- Plasticiser Resistant
- High Strength
- Fast Tacking
- High Heat Resistant
- Low Odour
- High Coverage
- Waterproof
- No Ozone Depleting Substances
PREPARATIONFor best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.
TECHNICAL DETAILS
APPLICATION METHOD
APPEARANCE
ODOUR
CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.
LIMITATIONS
FLOOR-TAC is not recommended for use on Polystyrene.
TESTING
Always test the suitability of the product for your application before use.
COVERAGE
15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).
SIZES
TECHNICAL DATA SHEET