NZ-WIDE SHIPPING - FREIGHT FREE
cart Shopping Cart Shopping Cart
NZ’s Widest Range Of Industrial Adhesives
 
Premium Quality Guaranteed
 
Bulk & Wholesale
Prices
 

HBS109

HBS109

LOCTITE PURBOND HB S 109 Polyurethane Glue 800gm

LOCTITE PURBOND HB S 109 Polyurethane Glue 800gm
larger imageMove mouse over the image to magnify
LOCTITE PURBOND HB S 109 Polyurethane Glue 800gm
NZ$38.25
excl GST
Qty.
PURBOND HBS 109 is a liquid one-component polyurethane adhesive which is particularly useful where highly durable bonds are required for timber applications.
PURBOND HBS 109 is manufactured formaldehyde and solvent free. 

COMMON USES
  • Window frames, doors and door frames, laminated timber where environmental resistance is required.
  • Has also proved useful for filling small cavaties, such as the coving on bench tops, where the rapid development of a tough impact resistant gap filling foam is an advantage during manufacture.
BONDS
Timber, including more difficult types such as Rimu.

ADVANTAGES
  • Structural Grade (AS/NZS 4364:2010)
  • One component product, no mixing.
  • Bonded parts can be processed after 25 minutes.
  • Contains no formaldehyde.
  • Formaldehyde Standard: JAIA (Japan Adhesive Industry Association) Independent Control Standard against Indoor Air Pollution.
PROPERTIES
  • The adhesive requires moisture or humidity to cure into a strong, non-brittle
  • adhesive film.
  • A slight foaming effect during curing is a normal side effect of the chemical reaction.
PREPARATION
Surfaces must be clean and free from any adhesive-abrasive substances like oil, grease or release agents. For more details see the TDS.

TECHNICAL DETAILS
  • Viscosity; approx. 20'000 mPa.s (Sp. 6 / 20 UpM / 20 °C.
  • Assembly time: 10 minutes
  • Press time/Curing time: 25 minutes
APPLICATION METHOD
Coated surfaces should be pressed together immediately but under no circumstances later than 4 minutes after the application of the adhesive. Minimum press time under conditions of 20°C, 65% relative humidity and 12% wood moisture content is 10 minutes.

APPEARANCE
  • Beige free flowing fluid
COVERAGE
Application rate; 140 - 180 g/m2.

SIZES
  • 800 gram plastic applicator bottle.
 

You might also be interested in ...

TEL +64 9 444 4878
FAX:

EMAIL:

Shop:
+64 9 442 5972

enquiries@glueguru.co.nz

18 Kaimahi Road
Wairau Valley
Auckland 0627