NZ-WIDE SHIPPING
cart Shopping Cart Shopping Cart
NZ’s Widest Range Of Industrial Adhesives
 
Premium Quality Guaranteed
 
Bulk & Wholesale
Prices
 

TACULTC

TACULTC

CANTAC ULTRA-TAC Adhesive Clear 13.6kg

CANTAC ULTRA-TAC Adhesive Clear 13.6kg
larger imageMove mouse over the image to magnify
CANTAC ULTRA-TAC Adhesive Clear 13.6kg
NZ$461.03
excl GST
Qty.
ULTRA-TAC is a premium quality pressure sensitive spray adhesive formulated for bonding a wide variety of insulation materials and building wraps to steel, aluminium, wood and concrete. UTLRA-TAC can be used single-sided due to its ultra tacky consistency, or double-sided as a contact adhesive for more aggressive bonds. ULTRA-TAC is an excellent choice for bonding fibre glass, polyester and polystyrene insulation to steel and other porous and non-porous substrates. ULTRA-TAC is commonly used for attaching building wraps and polystyrene directly onto steel framing prior to cladding due to its high speed application and ease of use.

COMMON USES
  • Bonds Insulation Material to Ducting, Bonds Building Wrap & Polystyrene to Steel Framing, Bonds Polystyrene to a Variety of Substrates, Bonds Carpet & Underlay, Tape Primer on Porous Surfaces, Formwork Construction
BONDS
ULTRA-TAC will bond almost any substrate and remain permanently tacky, substrates include: duct insulation, steel, aluminium, fiberglass, Expanded Polystyrene Foam (EPS), polyester, MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, corflute and most plastics.

ADVANTAGES
  • Pressure Sensitive
  • Single or Double
  • Sided Application
  • Polystyrene Safe
  • Waterproof
  • Long Open Time
  • No Ozone Depleting
  • Substances
  • Low Odour
  • High Coverage
  • High Solids
PREPARATION
For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.

TECHNICAL DETAILS
  • Chemical Description: Solvent Based Contact Adhesive
  • Solids Content: 40 - 46%
  • Viscosity: Sprayable Grade
  • Minimum Open Time: 1 - 5 minutes
  • Maximum Open Time: 5 hours (best results within 1hr)
  • Heat Resistance: -40 – +85ºC
  • Cleaner: Citrus Cleaner or Acetone
  • Flash Point: -41ºC
  • Specific Density: 0.70kg per ltr +/- 5%
APPLICATION METHOD
Sprayed through CANTAC brand Guns & Hoses (Sold separately)

APPEARANCE
  • Clear Sprayable Liquid
ODOUR
Minimal Solvent Odour

CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.

LIMITATIONS
ULTRA-TAC is not suitable for High Pressure Laminates (HPL) or applications requiring high strength due to its tacky & flexible glue line. For high strength bonds on polystyrene we recommend POLY-TAC. ULTRA-TAC is not suitable for vinyl flooring. TESTING Always test the suitability of the product for your application before use.

COVERAGE
15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).

SIZES
  • 13.6kg Recyclable Canister
  • 575ml Aerosol

TECHNICAL DATA SHEET Download

 

A Material Safety Data Sheet will be supplied upon request, please click here ...

You might also be interested in ...

CUSTOMER SERVICE

Contact Us
FAQ
Trade Accounts

Delivery
Terms of Trade

 

 

CONTACT US

18 Kaimahi Road, 
Wairau Valley, 
Auckland 0627